Route & bending
Draw the corners, curves and transitions. Check this model’s bending direction and minimum bend diameter before approving the route.
Neon Flex · BEXLIGHT
Top-bend Silicone Neon Flex
Model SR006-1004TF-140P2835IP67
A silicone-enclosed LED light line for shaped and architectural details. Choose the bending direction and enclosure size to match the route of your installation.
- Supply voltage
- 24V
- Dimensions
- 10*4.5*5000mm
- Cut interval
- 50mm
- Protection
- IP67
- Colour temperature options
- 2700, 3000, 4000, 5000
- CRI options
- 80Ra, 90Ra, 95Ra
For fixture development, project supply and repeat B2B orders. Include the quantity and intended configuration in your enquiry.
Shape the light around the detail.
Work from the intended route, bending direction and termination position. A silicone neon flex is selected as an assembly: its body size, mounting arrangement and feed cable need space as well as the visible light line.
Plan the complete lighting assembly.
Coordinate this model with the selected profile, diffuser, driver, sensors and quick-connect harness. Discuss Pre-Cut Custom Lengths and Custom Assembly & Kitting against the drawings; a catalogue strip alone is not a ready-to-install kit.
MODEL DATA
The details
that define the model.
Match the selected configuration to your order and fixture drawing. Options and catalogue ranges describe available configurations rather than simultaneous ratings.
Model reference
SR006-1004TF-140P2835IP67
| Parameter | Value / options |
|---|---|
| Luminous output | To confirm |
| Power per metre | 14.4 W/m |
| LEDs per metre | 140 |
| Supply voltage | 24V |
| Dimensions | 10*4.5*5000mm |
| Cut interval | 50mm |
| Minimum bend diameter | >60mm |
| Copper foil | 3OZ |
| Protection | IP67 |
| Colour temperature options | 2700, 3000, 4000, 5000 |
| CRI options | 80Ra, 90Ra, 95Ra |
| LED type | 2835 |
Configuration values requiring confirmation
Lumen output: title 1350; source field 1500-1999.
Full catalogue record
Retained for reference; confirm options for the supplied configuration.
| Power(W/m) | 9.7-14.4 |
|---|---|
| Voltage | 24V |
| Lumen output | 1500-1999 |
| CCT | 2700, 3000, 4000, 5000 |
| CRI | 80Ra, 90Ra, 95Ra |
| LED Type | 2835 |
| LEDs/m | 140LEDs/m |
| Dimension | 10*4.5*5000mm |
| Cut unit | 50mm |
| Bend Diameter | >60mm |
| Copper Foil | 3OZ |
| IP Rating | IP67 |
| Warranty | 3-5 years |
Check the fit.
Approve the result.
Use the model information alongside your fixture and installation requirements. The sample should answer the questions that a catalogue image cannot.
Mounting & ends
Allow for mounting clips or channels, end caps, cable exits and service access. A body IP rating does not establish the rating of a cut and reassembled installation.
Supply & control
Confirm the actual lengths, input voltage and controller arrangement. Validate colour and dimming on a representative sample before releasing a repeat order.
Plan this source
in the right detail.
This enclosed flexible source is a candidate for indirect light routes. Check its actual bend direction, body section and termination allowance against the drawn route. These are application planning routes, subject to configuration and sample review.
LED Skirting Board Baseboard Systems
Plan a continuous line through doors, corners and finishes with identified feed points and replaceable light sections.
View the solution →
Headboard & Floating Bed Accent Lights
Plan the ambient effect around seated and sleeping eye positions, with switches and service points within reach.
View the solution →TECHNICAL SUPPORT
Put the right information
behind the order.
Need a model datasheet, dimensional drawing or wiring information? Send the model reference and the configuration you are considering so the appropriate documents can be identified.
For a quotation, include the application, quantity and unit, section lengths, colour requirement, target market and any fixture drawings.
Request documents or discuss this modelFREQUENTLY ASKED QUESTIONS
Questions about SR006-1004TF-140P2835IP67
Model selection, installation scope and the information needed for a B2B quotation.
Ask a project question →What supply voltage does SR006-1004TF-140P2835IP67 need?
The model record lists 24V. Match the selected configuration to the driver output and confirm the complete branch load, wiring and control arrangement. Do not connect a low-voltage strip directly to mains power.
Can this model be cut to our furniture dimensions?
The listed cut interval is 50mm. Work to the permitted cut marks and allow space for the termination, cable exit and mounting detail. Finished assemblies need a length schedule; the cut interval does not mean every requested dimension can be supplied exactly.
Where does the listed IP67 protection apply?
This is the protection value shown for the catalogue source configuration. Check the intended exposure, cut ends, connections and mounting assembly separately. A reel rating does not automatically apply to a cut and reassembled lighting system.
What must be checked before bending this neon flex?
Confirm the model’s bending direction and minimum bend diameter, then mark curves, end caps and cable exits on the route drawing. Do not twist the body to follow a second bending plane or assume another neon model uses the same mounting section.
Is this catalogue item a complete plug-and-play kit?
This page identifies the light source. A complete assembly also defines the profile, diffuser, driver, controls and harness. Send the fixture drawing and quantities to scope pre-cut lengths, prewired connections and packing by module.
What should we include when requesting this model for a project?
Quote SR006-1004TF-140P2835IP67 and specify the selected colour, finished lengths, feed exits, quantity and unit. Add the application drawings, target market and required documents. Catalogue options and ranges need to be resolved into one identifiable order configuration.
Compare within
the range.
Check the individual configuration and physical dimensions before substituting a model.
